|
DENT 2.0 Beeblebrox released
Dear DENT folks, For those, who missed it like me, DENT 2.0 Beeblebrox was released [1][2]. Kind regards, Paul [1]: https://dent.dev/announcements/2022/03/08/dent-2-0-secure-and-scalable-open-source-n
Dear DENT folks, For those, who missed it like me, DENT 2.0 Beeblebrox was released [1][2]. Kind regards, Paul [1]: https://dent.dev/announcements/2022/03/08/dent-2-0-secure-and-scalable-open-source-n
|
By
Paul Menzel
·
|
|
documentation on using switchdev L3 forwarding? 14 messages
Hi! as far as i understand dentos is just switchdev based. The only doc for switchdev is here https://www.kernel.org/doc/Documentation/networking/switchdev.txt which suggests standard userspace tools
Hi! as far as i understand dentos is just switchdev based. The only doc for switchdev is here https://www.kernel.org/doc/Documentation/networking/switchdev.txt which suggests standard userspace tools
|
By
Arvid Picciani
·
|
|
Replica.one Debian support follow-up
Hello everyone, based on the TSC call we had yesterday we would like to share with you some additional pointers. As mentioned on the call, we have extended Replica.one to build Debian as well as Ubunt
Hello everyone, based on the TSC call we had yesterday we would like to share with you some additional pointers. As mentioned on the call, we have extended Replica.one to build Debian as well as Ubunt
|
By
Jakov Petrina
·
|
|
Alternative to Zoom for conferences 8 messages
Dear Dent community, I know, probably most of you do not care what conferencing system to use, but trying to replace proprietary solutions in switches, the same is possible in other areas. How many pa
Dear Dent community, I know, probably most of you do not care what conferencing system to use, but trying to replace proprietary solutions in switches, the same is possible in other areas. How many pa
|
By
Paul Menzel
·
|
|
Upstream Working Group 3 messages
Dear Dent community, Prior to sharing the details of the Upstream Working Group (UWG) it would be helpful to share why the upstream effort is so important. As shared on the Dent’s homepage – The Dent
Dear Dent community, Prior to sharing the details of the Upstream Working Group (UWG) it would be helpful to share why the upstream effort is so important. As shared on the Dent’s homepage – The Dent
|
By
Luka Perkov
·
|
|
Feature Development Working Group 2 messages
DENT community — The last TSC meeting was very productive. We touched on several important points and I’d like to follow up by initiating the feature development working group. It's been a bit more th
DENT community — The last TSC meeting was very productive. We touched on several important points and I’d like to follow up by initiating the feature development working group. It's been a bit more th
|
By
Jon Polom
·
|
|
[Sartura] TN48M kernel support update
Hello everyone, Following up on last weeks TSC meeting we are sharing links to the public Linux git repository branch where we have pushed an updated TN48M platform support patches. These include the
Hello everyone, Following up on last weeks TSC meeting we are sharing links to the public Linux git repository branch where we have pushed an updated TN48M platform support patches. These include the
|
By
Robert Marko
·
|
|
Build system/distribution alternatives to ONL 2 messages
Dear Dent folks, dear Sartura folks, In one of your presentation, you shared on the list, you compared Gentoo to the Yocto Project, and you concluded, that Gentoo’s advantage is, that it has more acti
Dear Dent folks, dear Sartura folks, In one of your presentation, you shared on the list, you compared Gentoo to the Yocto Project, and you concluded, that Gentoo’s advantage is, that it has more acti
|
By
Paul Menzel
·
|
|
[Sartura] Replica hands-on demo follow-up
Hello everyone, Thank you for participating in our hands-on demonstration of the Replica build system on yesterday's TSC meeting. We hope that the talk provided enough insight into how DENT community
Hello everyone, Thank you for participating in our hands-on demonstration of the Replica build system on yesterday's TSC meeting. We hope that the talk provided enough insight into how DENT community
|
By
Jakov Petrina
·
|
|
[Sartura] TN48M kernel support update
Hello everyone, Following up on yesterday's TSC meeting we are sharing links to the public Linux git repository branch where we have pushed an updated TN48M platform support patches. These include the
Hello everyone, Following up on yesterday's TSC meeting we are sharing links to the public Linux git repository branch where we have pushed an updated TN48M platform support patches. These include the
|
By
Robert Marko
·
|
|
[Sartura] TN48M kernel support
Hello everyone, following up on yesterdays TSC meeting we are sharing links to public Linux git repository branches where we have pushed our current TN48M platform support patches: * https://github.co
Hello everyone, following up on yesterdays TSC meeting we are sharing links to public Linux git repository branches where we have pushed our current TN48M platform support patches: * https://github.co
|
By
Robert Marko
·
|
|
Where to buy supported switches in Europe? 4 messages
Dear DENT folks, Thank you for creating and working on this project. We would like to test DENT on real hardware, and would like to buy a switch from the hardware compatibility list (HCL) [1]. Unfortu
Dear DENT folks, Thank you for creating and working on this project. We would like to test DENT on real hardware, and would like to buy a switch from the hardware compatibility list (HCL) [1]. Unfortu
|
By
Paul Menzel
·
|
|
[Sartura] TN48M: Linux patches 2 messages
Dear Jakov, Am 18.02.21 um 12:25 schrieb Jakov Petrina: Thank you so much for your message and publishing your Linux kernel source trees. That’s definitely the way to go, and what “the NOSes” should h
Dear Jakov, Am 18.02.21 um 12:25 schrieb Jakov Petrina: Thank you so much for your message and publishing your Linux kernel source trees. That’s definitely the way to go, and what “the NOSes” should h
|
By
Paul Menzel
·
|
|
[Sartura] TN48M and Replica.One progress, Feb 17 cont.
Hello everyone, thank you for participating in our continued presentation of our development progress on the Delta TN48M platform. We are sharing slides of the presentation shown yesterday, as well as
Hello everyone, thank you for participating in our continued presentation of our development progress on the Delta TN48M platform. We are sharing slides of the presentation shown yesterday, as well as
|
By
Jakov Petrina
·
|
|
Hardware Compatibility List 4 messages
All, I was looking at this here - https://dent.dev/dentos/ - I was curious as to what a typical CPU complex might be for DentOS. However the HCL does not contain any model numbers - just vendor, ASIC
All, I was looking at this here - https://dent.dev/dentos/ - I was curious as to what a typical CPU complex might be for DentOS. However the HCL does not contain any model numbers - just vendor, ASIC
|
By
Ben Gale
·
|
|
[Sartura] TN48M and Replica.One progress 3 messages
Hello everyone, thank you for participating in our presentation of our Linux and Replica.One development progress on the Delta TN48M platform. As discussed, we are sharing slides of the presentation s
Hello everyone, thank you for participating in our presentation of our Linux and Replica.One development progress on the Delta TN48M platform. As discussed, we are sharing slides of the presentation s
|
By
Jakov Petrina
·
|
|
Event: Introducing DENT OS, switchdev NOS for the Rest of Us @ Open Source Summit + Embedded Linux Conference Europe - Thursday, 29 October 2020
#cal-invite
Introducing DENT OS, switchdev NOS for the Rest of Us @ Open Source Summit + Embedded Linux Conference Europe When: Thursday, 29 October 2020 12:00pm to 1:30pm (UTC-04:00) America/New York Where: Virt
Introducing DENT OS, switchdev NOS for the Rest of Us @ Open Source Summit + Embedded Linux Conference Europe When: Thursday, 29 October 2020 12:00pm to 1:30pm (UTC-04:00) America/New York Where: Virt
|
By
discuss-dev@lists.dent.dev Calendar
·
|
|
[EXT] Re: [DENT discuss] Marvell Prestera 98DX3236 3 messages
Hi Dragan, I'm really appreciate your way of thinking but I would recommend you approaching our Switching MKT team with this suggestion. Please email to: Ravindran Suresh <sravindran@...> Regards, Mic
Hi Dragan, I'm really appreciate your way of thinking but I would recommend you approaching our Switching MKT team with this suggestion. Please email to: Ravindran Suresh <sravindran@...> Regards, Mic
|
By
Mickey Rachamim
·
|
|
Reminder: Open Networking and Edge Summit (ONES) (Sept 28-30)
Community Members: The Open Networking and Ege Summit (ONES) presented by LF Edge, LF Networking (ONAP,OPNFV,FD.io,ODL etc..) and The Linux Foundation, home to nearly two dozen industry-leading open s
Community Members: The Open Networking and Ege Summit (ONES) presented by LF Edge, LF Networking (ONAP,OPNFV,FD.io,ODL etc..) and The Linux Foundation, home to nearly two dozen industry-leading open s
|
By
Trishan de Lanerolle
·
|
|
Marvell Prestera 98DX3236 3 messages
Hello, I'm willing to work on implementing switchdev support for Marvell Prestera 98DX3236 chips. I know, a small 10G switch chip like 98DX3236 is probably not the primary focus of Marvell, but there
Hello, I'm willing to work on implementing switchdev support for Marvell Prestera 98DX3236 chips. I know, a small 10G switch chip like 98DX3236 is probably not the primary focus of Marvell, but there
|
By
Dragan Simic
·
|